2.5" scale Eureka
-
jessebanning
- Posts: 8
- Joined: Fri Aug 06, 2010 9:24 am
2.5" scale Eureka
We've started building the Eureka in 2.5" scale for a customer. Here are a few pictures. You can see quite a bit more on our website: http://www.jdlocomotiveworks.com
- Attachments
-
- Cylinder Pattern
- cyl pattern 10.jpg (5.39 KiB) Viewed 8942 times
-
- connecting rods
-
- Cow catcher
-
jessebanning
- Posts: 8
- Joined: Fri Aug 06, 2010 9:24 am
-
CraigH
- Posts: 206
- Joined: Sun Jul 19, 2009 10:25 am
- Location: Marin County, California (NPC country)
- Contact:
Re: 2.5" scale Eureka
Lovely.
Questions:
What will you be covering the boiler with?
PSI?
Expected performance specs?
Craig H
Questions:
What will you be covering the boiler with?
PSI?
Expected performance specs?
Craig H
Craig Hoefer
HDS Decals and other amusing projects
PacificNG.com co-conspirator
HDS Decals and other amusing projects
PacificNG.com co-conspirator
-
jessebanning
- Posts: 8
- Joined: Fri Aug 06, 2010 9:24 am
Re: 2.5" scale Eureka
The working pressure will be 100 - 120 PSI. The boiler will have either a ceramIc or fiberglass insulation cover by 16 or 18 gauge jacket that will be blued. The locomotive be fired on wood and should be able to easily pull 30+ adults. It will weigh close to 1000 lbs.
-
Andrew Brandon
- Posts: 579
- Joined: Mon Aug 17, 2009 4:37 pm
- Location: Grass Valley, Ca
- Contact:
Re: 2.5" scale Eureka
That's a fine machine you've got in the works. I look forward to seeing more!
Andrew Brandon - PacificNG Webmaster
An End To Red Domes In Our Lifetime!
An End To Red Domes In Our Lifetime!