"Florence & Cripple Creek" #500-599 box; 5+1/4" siding

Discussion of specific prototype locomotives and other equipment of all gauges.
Post Reply
User avatar
Loco112
Posts: 77
Joined: Wed Nov 03, 2010 8:36 pm
Location: Dallas, Texas.
Contact:

"Florence & Cripple Creek" #500-599 box; 5+1/4" siding

Post by Loco112 » Tue Dec 10, 2013 6:41 pm

Does anyone have a drawing of the double scribed (or is it Center scribed?) siding, that measured 5+1/4" as used on the ACF built "Florence & Cripple Creek" #500-599, and early 50,000lb C&S and the D&RGW (pre-300o series) box cars?

The F&CC box cars were built by "Peninsualr Car Company" (an American Car & Foundry subsidiuary).

I just learned this is an old MCB/AAR standard siding and it should be in the Car Builder’s Cyclopedias, but I only have Locomotive Cyclopedias, so still need to find it. Whomever locates it first, please post it here.
Create projects so fantastic they inspire others to undertake even greater projects.
Loco112

rrsteve
Posts: 11
Joined: Sun Jul 25, 2010 6:26 pm

Re: "Florence & Cripple Creek" #500-599 box; 5+1/4" siding

Post by rrsteve » Wed Dec 11, 2013 4:50 pm

How's this?
image2013-12-11-184155.jpg
From the Report of the Proceedings of the Fiftieth Annual Convention of the Master Car Builders' Association
Steve

dsp&p_fan
Posts: 111
Joined: Fri Sep 04, 2009 12:33 pm

Re: "Florence & Cripple Creek" #500-599 box; 5+1/4" siding

Post by dsp&p_fan » Thu Jan 02, 2014 9:23 pm

Yes, it is in the Car Builder Encyclopedias. There is a section towards the back (in the 1890s-1900s versions) filled with MCB standards. I've referenced the same item Steve posted in there. Good stuff.

Post Reply