PacificNG Header
PacificNG Header 

Eureka Nevada 10 - Wheel arraingment?

Discussion of specific prototype locomotives and other equipment of all gauges.

Eureka Nevada 10 - Wheel arraingment?

Postby Randy Hees » Wed Nov 19, 2014 11:46 pm

Myrick in Railroads of Nevada and Eastern California reports that this engine No 10(2nd) was a 2-8-0, Porter, 5893, July 1916, 12x16, 36" drivers, 27 tons, Purchased new, (I would add that in any case, it was one of three engines burned in a 1927 engine house fire)

The NMRA Porter book generally agrees with the above with one significant variation... they report the wheel arrangement as 2-6-4t class 4-C-2-R

Martin Hansen posted a photo on the Narrow Gauge Discussion Forum http://ngdiscussion.net/phorum/read.php ... msg-219114 which shows the three burned locomotives sitting in the dead line. No 10 should be the furthest... it does not appear to be a Forney type...

Any thoughts...

Randy
Randy Hees

Director, Nevada State Railroad Museum, Boulder City
Railway Preservation News http://www.rypn.org
Chasing old trains where ever I may find them...
http://randyhees.blogspot.com/
Randy Hees
 
Posts: 461
Joined: Mon Aug 17, 2009 7:07 pm

Re: Eureka Nevada 10 - Wheel arraingment?

Postby GregMaxwell » Thu Nov 20, 2014 9:58 am

Randy,

EN #10 was built as a 2-6-4T and was rebuilt in March-May1926 into a 2-6-0 by the Palisade shops. The rebuilt #10 received its tender from EN #7. #7 was not well liked and was out of service and stored outside when the 1927 fire occurred thus sparing the little prarie.

Greg Maxwell
GregMaxwell
 
Posts: 29
Joined: Fri Feb 17, 2012 9:31 am


Return to Prototype Locomotive & Rolling Stock

Who is online

Users browsing this forum: No registered users and 5 guests

cron