PacificNG Header
PacificNG Header 

Calico & Daggett Porters

Discussion of specific prototype locomotives and other equipment of all gauges.

Calico & Daggett Porters

Postby Randy Hees » Wed Jul 01, 2015 11:46 am

While working on write-ups on the various Daggett railroads for the site I found a surprise... the "known" names of the two locomotives do not match Porter records.

the common published sources (Myrick, and the NMRA Porter book) say that the 0-4-0t, c/n 937 was named Emil, while the 0-6-0t, c/n 962 was named Sanger. Instead, the porter records say that No 1, the 0-4-0t was "Uncle Dan" and that No 2 the 0-6-0t was Emil... for my write ups I have used the names as listed on the Porter specification sheets. I note that the Bob Leemuth list agrees with the Porter specification sheets but adds that the 0-6-0t was originally to be named Daniel. The specification sheet does not include a reference to Daniel.

No 1 Uncle Dan, Porter 937 7x12 0-4-0t 36” gauge 6/1888 class b-s delivered to Daggett CA
To American Borax Co #1 (1901) Daggett CA, To Sterling Borax #1 1908 Lang CA, likely scrapped at Lang.
Emil was leased to American Borax before being sold to that company, and may have been rented to the Borate & Daggett during construction.

No 2 Emil Porter 962 8x14 0-6-0t 36” gauge 8/1888 class c-s delivered to Daggett CA
To Mohave and Milltown, c.1903. A photo shows this locomotive in use on the Borate & Daggett during construction of that railroad.
Attachments
Porter specification for Sanger cn 962.jpg
Porter specification for Emil cn 937.jpg
Randy Hees

Director, Nevada State Railroad Museum, Boulder City
Railway Preservation News http://www.rypn.org
Chasing old trains where ever I may find them...
http://randyhees.blogspot.com/
Randy Hees
 
Posts: 455
Joined: Mon Aug 17, 2009 7:07 pm

Return to Prototype Locomotive & Rolling Stock

Who is online

Users browsing this forum: No registered users and 1 guest